.:+:. Wii-CLIP-2 V12C D2Sun V3 MODCHIP D2-Sun Mod-Chip SOLDERLESS MOD CHIP CLIP KIT Modchips

What's New?

Xecuter Blaster 360 CK3
~~54.95 Euro~~
44.95 Euro

This Product is for :


	Other products

Wii-Clip-2 V12C with D2Sun V3 SPI (pre soldered)

Stock status: out of stock or not available

*** SOLDERLESS *** EVERYONE can now install a wii modchip without warranty loss! - The original Wii-CLIP-2 V12C (Wii-Clip PRO) with pre soldered D2Sun V3 SPI allows you to install a D2-Sun V3 ModChip even without any technical skills! Only put the Mod-Chip on the wii Drive-IC - thats it! But the best bonus with this WiClip is, you must not solder on the wii motherboard and therefore this mod chip installation would not void your warranty (info: a Wii does not have a security sticker and so you can open your wii without any troubles :)

The D2Sun V3 SPI is the fist wii modchip without any solder jumper and also one of the fist wii chip for ALL wii versions - including the new D2E and the Korea region! With this high end mod-chip you can boot DVD+-R or DVD+-RW wii / GameCube Imports / Backups and Hombrews! The installation is a real "sunrise" due to the reduced wires (only 7 wires for D2C, D2C2 and D2E) and also due to the switch jumpers. But this is not all, because this is wii mod-chip comes with a 24M on board CLK and therefore it is 100% work stable on all wii´s, without any CLK problem some other Mod-chips have. You need more ? --> here it is: it comes with a free external control and status LED board and now it is possible to switch off the complete modchip. You need again more ? --> here it is: This high end wii chip introduce the programming concept called "MULTIFUNCTIONAL JTAG". D2-Sun V3 SPI is consisting of a last generation ACTEL chip that can be re-programmed with different firmwares. The JTAG update suffers the fact that it needs an external USB programmer to be implemented, but it gives to the developers the possibility to COMPLETELY CHANGE THE CHIP CODE, SOMETHING UNTHINKABLE FOR OTHER PROJECTS - BEVOR OR AFTER THE INSTALLATION - WITH and WITHOUT a Wii!

Features:

EVERYONE can now install a wii modchip - easy and fast!
No difficult soldering - you must not solder on the wii DMS, D1A, D2A, D2B motherboard
No warranty loss!
ALL-IN-ONE solution: Supports the chipsets DMS,D2A,D2B (including pincut), D2C, D2C2 and D2E
Free control and status LED board to switch OFF the mod-chip
Works also without the control and status LED board (the D2Sun is always in ON mode)
The first wii modchip without any solder jumper
It's the easiest chip to install on D2C, D2C2 and D2E: only 6 wires
One of the first D2C2 / D2E compatible chip that is as clean as DMS / D2B drivechips: full control over the drive's firmware, no physical patching on the lines while the games are running. That means perfect stability, more control, and no stress on the drive's components
Supports the pins-cuted D2B Wii without grinding the chip
It's the easiest chip to install on DMS and D2B as well with only 5 wires: no need to use a dremel or super-glue with "cut-pin" drives, and there's no pin/via to solder even with the latest D2B boards.
It's one of the first chip to include a decent amount of SPI flash memory 8 Mbit (1MB) for firmware and data storage
Come with 24M on board CLK, 100% work stable on all Wiis, without any CLK problem some other Mod- chips have
Compatible with DVD+/-R, DVD+/-RW and Dual-layer 8.5G DVD (movies and GCOS)
Direct boot of Wii original and backup games from the same region
Direct boot of Gamecube original and backup games from the same region
Direct boot of different NTSC region Wii and GC games on USA and JAP consoles
Partial region free support on Wii and GC original and backup games with different videomode (ie PAL<->USA, JAPAN,KOR)
Improved read settings for recordable media
Supports running GC games at Wii disk speed
GC Audiostreaming Fix
Supports full-size DVD and DVD9 discs for GC homebrew
Supports GC multigame discs
Supports Wii and GC multidisc games
Does not modify RAM, making it virtually undetectable for the Wii
Compact design, best quality components, rock solid high speed controller
High speed and high secure Actel FPGA
Professional ESD packing
Fully updateable (JTAG and SPI Flash) via the optional USB / JTAG Programmer

Compatibility:

The D2Sun V3 SPI ModChip is with all DMS, D1A, D2A, D2B, D2C, D2C2 and D2E driver ICs and all regions (PAL / USA / JAP / KOR) compatible. It works not with the epoxy protected D2E driver ICs, the LEH275xxx and higher and the LEMxxx serial numbers.

Installation:

Click here to view the Wii-CLIP-2 V12C (Wii-Clip PRO) with pre soldered D2 Sun V3 mod chip installation

Content:		Wii-CLIP2 V12C (Wii-Clip PRO) with pre soldered D2Sun V3 SPI (original)
		Free D2Sun V3 control and status LED board
		Flat cable for a USB / JTAG Programmer
		Flat cable for the control and status LED board